Spring Pool Prep: Getting Your Pool Ready for the Warmer Months
During spring, people deep clean their homes, reorganize their belongings, and give their backyards a makeover. You might also be planning outdoor barbecues, family gatherings and poolside fun activities for this season. However, before you enter the pool and start enjoying yourself, it’s essential to make sure your pool is ready.
By making a little preparation now, you can avoid problems later and ensure your pool remains safe, clean, and hygienic. Let’s understand how you can get your pool ready for the spring season.
1. Clean the Pool Cover
You probably covered your pool for the winter to keep it clean – now is the right time to remove the cover. Be careful not to pull it off too quickly as it might cause debris to fall into the water. Clean it properly by using a hose and scrubbing off any dirt, dust, or debris that may have accumulated. Let it dry out completely before storing it away, this can help extend its lifespan and ensure it lasts longer.
2. Inspect Your Pool Equipment
Before using your pool and turning on anything, you must carefully check all pool equipment. Make sure the pumps, filters, heaters, and other equipment are functioning properly. See if there are any signs of wear and tear, leaks, or cracks and get them fixed promptly to avoid costly repairs and problems down the line. Clean out the filter as debris may have clogged it over the winter, ensuring that your pool filter will work efficiently in the warmer months ahead.
3. Check the Water Chemistry
If a pool hasn’t been used for months, it becomes vital to do a thorough chemical check-up of its water as unbalanced water chemistry can result in algae growth, cloudy water, and cause damage to the pool surfaces and equipment. To ensure the pool’s water remains healthy and hygienic, it’s essential to maintain proper water chemistry.
You can contact a professional company like Pure Water Pools of Naples for comprehensive pool water testing. They do a detailed check of the water’s pH, chlorine, alkalinity and calcium hardness and balance it if needed to ensure it’s safe and swim-ready.
4. Clean and Vacuum the Pool
Even if a pool has been covered properly, dust, debris, leaves, and algae spores can still find their way into it. To clean your pool, start by removing any debris floating in the water and thoroughly brush down the sides and bottom of the pool.
After brushing, you can make use of a vacuum cleaner to remove any debris that has settled at the bottom. By cleaning your pool you can prevent your filtration system from getting clogged with dirt and debris.
5. Turn on the Filtration System
After everything has been cleaned and the water chemistry has been balanced, it’s time to start your filtration system. Keep it running continuously for 24 to 48 hours, to ensure the water gets circulated and any remaining impurities get filtered out.
This helps distribute the chemicals evenly and gives you a sparkling clean pool. If you feel that the pool’s water levels are low then you can fill it up now, this also allows the pool pump to work correctly.
6. Inspect All Safety Features
Check all the safety measures around the pool, like the railings, ladders, pool covers, and fencing. Make sure the gates are closing and latching properly and your pool meets all local safety codes. By inspecting the safety features now you can avoid accidents later.
Get top-notch pool cleaning service in Naples, FL by calling Pure Water Pools of Naples today. Our skilled team can help you with everything, from pool cleaning and maintenance to equipment checks and chemical balancing. Rely on us and enjoy your pool throughout the season.
